Updated Geological Model Transforms IOCG Understanding
Released
Released
Announcement PDF
ELIZABETH CREEK
2023X
ASX RELEASE
Code: COD
ASX Code: COD
3 October 2023
Updated Geological Model Transforms IOCG Understanding
Comprehensive new Elizabeth Creek geological model based on drilling, extensive newly-acquired geophysics
and structural geology transforms IOCG understanding and drives target generation.
Highlights
•
Optimal IOCG drill target area identified from comprehensive geophysical interpretation of the Emmie System.
•
New model, which is based on 23,000m drilling and 7 new and historical geophysical and petrophysical datasets
will allow for tightly targeted, highly efficient future drilling.
•
Geophysics indicates structural corridor controlling IOCG mineralisation extends up to 2.4km to northern tenement
boundary.
•
Exciting new target, “Maggie IOCG” identified approximately 6km to southeast of previous IOCG intercepts.
Coda Minerals Limited (ASX: COD, “Coda”, or “the Company”) is pleased to announce significant results stemming from a
major geophysical reinterpretation exercise of the Emmie IOCG prospect and broader Emmie Bluff system at its 100%owned Elizabeth Creek Copper Project in South Australia.
The review, conducted by Mira Geoscience in collaboration with Coda’s technical team and principal geophysical
consultants NewGen Geo has generated a new and comprehensive model explaining the structural controls underpinning
the Emmie IOCG mineralisation with valuable explanatory and predictive power.
The new interpretation suggests the presence of a vast, laterally extensive mineralising system with demonstrated
potential to extend at least the 2.4km NNE from the existing Emmie IOCG discovery to Coda’s northern tenement boundary
as well as further to the south. The review also reaffirmed the significance of a major new IOCG target, “Maggie IOCG”,
located approximately 6km to the south-east of Emmie Bluff.
The review principally consisted of a synthesis of recent and historical data, focused primarily on drill results, 2D seismic
and Coda’s recent close-spaced gravity survey 1, as well as historic and recent magnetotelluric (MT), Ambient Noise
Tomography (ANT), density, petrophysics and other data.
Commenting on the study, Coda’s CEO Chris Stevens said: “It is hard to overstate the scale and potential of the Elizabeth
Creek Project, which has now been validated by the most comprehensive and systematic geological review ever undertaken
in this district. Over the past six months, we have taken data from the entire drill programme, plus multiple newly acquired
and historical geophysical datasets, to establish an updated geological model that has answered a lot of our questions.
“Previous drilling by Coda has delineated IOCG mineralisation that can be inferred reasonably confidently across a distance
of between 150 and 300m along the projected strike of the faults. This represents less than 20% of the total strike length
of the most prospective zone identified by the geophysical survey and barely 10% of the total potential strike to the northern
border of our tenure.
1
Completed in April of 2023. For details, see “Major Emmie IOCG Gravity Survey Completed”, released to the market on 5 April 2 023 and available at
https://www.codaminerals.com/wp-content/uploads/2023/04/20230405_COD_ASX-ANN_Major-Emmie-IOCG-Gravity-SurveyCompleted_VRelease.pdf
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
ELIZABETH CREEK
“The first Emmie IOCG drill-hole in June 2021 demonstrated the presence of a vast copper system at depth below the existing
Resource at Elizabeth Creek. With over 550,000 tonnes of contained copper and 20,000 tonnes of cobalt sitting above the
IOCG intercepts and with 18 of 21 diamond holes into the IOCG intersecting meaningful mineralisation, we know for a fact
there has been a massive amount of copper moving through this system.
“Following this work, we now have an updated model for the deeper IOCG mineralisation that represents a huge leap forward
in helping us not only explain previous intercepts but also giving us a much clearer picture of where we can reasonably expect
to find more mineralisation and where to target the structures to make this discovery viable at depth. Plus, we have
confirmed a compelling new target at Maggie IOCG to the south-east that represents a walk-up drill target any day of the
week. This will now lead to clear targeting for the next phase of work.”
Figure 1 Simplified Plan View of Emmie IOCG area including Emmie Bluff Resource area and Maggie IOCG to the south-east. The area
shows the enormous lateral extent of the IOCG area to be targeted for significant thickness and scale at Emmie IOCG as well as the new
untested IOCG target at Maggie IOCG. Background: terrain corrected Bouguer anomaly (@ 2.4g/cc) gravity Tilt angle filter image
Figure 2 Maggie IOCG looking northwest. Pods have been generated by “IOCG Scanner” inversion to isolate potential IOCG mineralisation
by discriminating gravity anomalies which can be isolated below the basement contact. No slicing has been applied to the images – Maggie
IOCG anomalism is located approximately 5.5km southeast of known mineralisation Emmie IOCG.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
Model Development
ELIZABETH CREEK
In order to build a model to improve drill targeting and ultimately lead to discovery, Coda’s consultants integrated multiple
new and existing geophysical datasets with the over 23,000m of drilling data from the Emmie IOCG drill programme
undertaken between June 2021 and May 2022.
Work focussed initially on detailed 3D modelling of the basement contact and the stratigraphic sequence overlying it.
Defining both of these in detail and performing a three dimensional “geologically constrained” inversion is required to
isolate the gravitational signature of basement features of interest.
Further context was provided by additional datasets including recent and historical drilling. 2D seismic was used to interpret
a series of faults which appeared to be significant components of the mineralising system.
The resulting dataset showed strong correlation between drilled mineralisation, the interpreted faults, a large basement
high (one in a series of such highs) and excess mass identified in the gravity survey, which is interpreted to represent a major
accumulation of iron oxide. The model also suggested extensive basement lows associated with the sediment hosted Emmie
Bluff Mineral Resource. These basement lows extend past the known Emmie Bluff Mineral Resource and strongly suggest
expansion potential for that Resource2 (Figure 4).
Summary Geological Interpretation
The new model refines Coda’s existing hypothesis for the Emmie IOCG mineralising event, which proposed that low pressure
copper rich fluids moving up conduits are capped by granite thrust sheets. This forces the mineralising fluids to move
through the sub-horizontal permeable strata within the Wallaroo Group resulting in a series of stacked horizontal lodes
which extend up to several hundred metres away from the structures. The new model suggests that a pair of North to NNE
striking low angle thrust faults dipping to the east and plunging slightly to the north are the most likely controlling structures,
and are associated with the highest density material in the area.
Exploration Implications
The model suggests that drilling to date has been focussed principally in the southern third of a ~1.8km long region defined
by basement elevation, gravity anomalism and interpreted structures. Due perhaps to the plunge of the faults, basement
elevation is lost at this point, but there is strong evidence from other indicators including historical drill results that the
trend continues at least to the tenement boundary and beyond, resulting in a total prospective corridor of between of 2.5
and 3km.
Under this paradigm, additional IOCG mineralisation is anticipated to be found where permeable strata (as previously
defined in drilling) interact with the two identified mineralising structures. Figure 3 provides an example, showing the
approximate anticipated spread of nominal flat-lying permeable strata and the known faults. Beyond lateral extension
however, the model also suggests scope for expansion down-dip, which is supported by deeper mineralisation known from
historical holes 3.
2
See “Implications (Sediment Hosted Cu-Co)”, below
E.g.. Historical drillhole MGD 55, located approximately 250m due east of mineralisation encountered in drillhole DD21EBD0002W3, where mineralised
(>1%Cu) intercepts start approximately 80m lower in the sequence, in line with the dip of the lower fault.
3
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
ELIZABETH CREEK
Figure 3 Under the new model, high priority target zones are identified at the interaction between permeable flat lying strata within the
Wallaroo and one of the two primary identified faults. High density material serves as an effective proxy for haematite, which provides
the redox conditions for copper and gold to drop out of solution and concentrate.
The model has good evidentiary backing and strong explanatory power, making clear in many cases why specific recent or
historic holes did or did not encounter mineralisation. It also provides a testable predictive hypothesis to drive drill targeting
to a high degree of precision.
The work has also validated the newly named “Maggie IOCG” target to the southeast, which has been identified as a
persistent gravity anomaly which is consistently resolving at the approximate depth of the palaeosurface.
Historical drillhole MGD42 was drilled in the vicinity of this anomaly in 2007. It reached basement at a depth of 939.64m
and intersected felsic to intermediate volcanics with pervasive and intense haematite alteration recorded in the logging.
The peak Cu value is 916 ppm, as part of an anomalous section between 1010 and 1014 m depth, immediately before the
hole was terminated at 1023.3m4. Based on the most recent work, it would appear that this hole was drilled too far to the
north to intercept the Maggie IOCG target, which remains an untested and high priority target.
Implications (Sediment Hosted Cu-Co)
Although the focus of the review was on the Emmie IOCG deposit and the broader IOCG system, part of the work required
an assessment of the overlying sediments, including the Tapley Hill Formation. During this process, a pronounced basement
low was identified based on a combination of 2D seismic and MT data which is well correlated with the basin which hosts
the Tapley Hill Formation black shale and the associated Emmie Bluff Mineral Resource.
Importantly, this basement low extends some distance past the currently modelled southern extent of the shale body,
extending to the southeast and partially correlates with the results of the ANT survey completed earlier this year. This
4 All data related to drillhole MGD 42 extraceted from Envelope ENV10356 from the South Australian Resources Information
Gateway (SARIG)
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
ELIZABETH CREEK
provides additional evidence for the growth potential of the Emmie Bluff Mineral Resource, which the Company plans to
investigate as part of the next phase of exploration at Elizabeth Creek.
Figure 4 Interpreted Emmie Bluff Tapley Hill Formation based on drilling (black) and the Mira interpretation (Red). Note the correlation
between the -675m RL basement depth isopach (yellow outline) and the known extent of the Tapley. This strongly suggest the potential
to extend to the southeast, and for isolated basins to the east of Emmie Bluff. The western basement low is to the west of an apparent
major controlling structure and does not appear to be associated with Tapley Hill Formation shale.
Next Steps
The updated geological model for Emmie IOCG and the sedimentary copper-cobalt above it is the culmination of nearly nine
months of work both collecting data and better interpreting and understanding the IOCG mineralisation of Elizabeth Creek.
Coda will undertake a short additional peer review process prior to finalising drill targets within the identified Emmie IOCG
system as well as at the newly identified IOCG target area at Maggie IOCG.
At the same time as finalising drill targets, Coda is progressing discussions with multiple interested parties in regard to
various forms of funding partnership aimed at progressing both the IOCG and sedimentary work.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
-
ELIZABETH CREEK
This announcement has been authorised for release by the Board of Coda Minerals Ltd
Further Information:
Chris Stevens
Chief Executive Officer
Coda Minerals Limited
info@codaminerals.com
Media:
Nicholas Read
Read Corporate
nicholas@readcorporate.com.au
Competent Persons’ Statements
The information in this report which relates to exploration results is based on information compiled by Mr. Matthew
Weber, who is an employee of the company. Mr Weber is a Member of the Australasian Institute of Mining and
Metallurgy and has sufficient relevant experience to the style of mineralisation and type of deposit under
consideration and to the activities undertaken to qualify as a Competent Person as defined in the 2012 Edition of the
Joint Ore Reserves Committee (JORC) Australasian Code for Reporting of Exploration Results, Mineral Resources and
Ore Reserves. Mr Weber consents to the inclusion in this report of the matters based on the information compiled by
him, in the form and context in which it appears.
The information in this announcement that relates to the Geophysical component of the Exploration Results is based
on information and supporting documentation compiled by Mr Regis Neroni, who is a Member of the Australian
Institute of Geoscientists (AIG) and a Registered Professional Geoscientist (RPGeo) in the fields of Geophysics and
Mineral Exploration. Mr Neroni is a Consulting Geophysicist with NewGen Geo Pty Ltd and has sufficient experience
relevant to the style of mineralisation under consideration and to the activity which is being undertaken to qualify as a
Competent Person as defined in the 2012 Edition of the “Australasian Code for Reporting of Exploration Results, Mineral
Resources and Ore Reserves”. Mr Neroni consents to the inclusion in this announcement of the matters based on this
information in the form and context in which it appears.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
About Coda Minerals
ELIZABETH CREEK
Coda Minerals Limited (ASX: COD) is focused on the discovery and development of minerals that are leveraged to the
global energy transformation through electrification and the adoption of renewable energy technologies.
Coda's flagship asset is the 100%-owned Elizabeth Creek Copper-Cobalt Project, located in the world-class Olympic
Copper Province in the Eastern Gawler Craton, South Australia’s most productive copper belt. Elizabeth Creek is centred
100km south of BHP’s Olympic Dam copper-gold-uranium mine, 15km from its new Oak Dam West Project and 50km
west of OZ Minerals’ Carrapateena copper-gold project.
Coda consolidated 100% ownership of the Elizabeth Creek Copper Project after completing the acquisition of its former
joint venture partner, Torrens Mining, in the first half of 2022.
In December 2021, Coda announced a maiden Indicated and Inferred Mineral Resource Estimate for the Emmie Bluff
copper-cobalt deposit at Elizabeth Creek comprising 43Mt @ 1.3% copper, 470ppm cobalt, 11g/t silver and 0.15% zinc
(1.84% CuEq) containing approximately 560kt copper, 20kt cobalt, 15.5Moz silver and 66kt zinc (800kt CuEq) 5.
Importantly, 92% of the contained metal is classified in the higher confidence ‘Indicated Resource’ category and is
available for use in mining studies.
Emmie Bluff is one of three known ‘Zambian-style’ copper-cobalt deposits at Elizabeth Creek, including JORC 2012
compliant Indicated Mineral Resources at the Windabout (18Mt @ 1.14% CuEq) and MG14 (1.8Mt @ 1.67% CuEq)
deposits6. Collectively, the three resources at Elizabeth Creek now host a total of 1.1 million tonnes of contained copper
equivalent5,6.
A scoping study into the development of these three deposits was released in March of 2023 demonstrated an
economically robust project with a 14 year mine life, capable of producing approximately 25,000 tonnes of copper and
1,000 tonnes of cobalt at steady state production levels. The project had a lifetime average AISC of USD $2.19/lb of Cu
(after by-product credits) and an approximately pre-tax NPV8 of $570M7.
Coda has also discovered a significant IOCG system adjacent to and below the Emmie Bluff target, with initial deep
diamond drilling in June 2021 intersecting 200m of intense IOCG alteration at the Emmie IOCG target, including
approximately 50m of copper sulphide mineralisation 8. Since then, Coda has drilled 21 holes into Emmie IOCG, with all
but three returning significant widths of mineralisation, some over 3% copper and 0.5g/t gold 9.
Coda has a dual strategy for success at Elizabeth Creek. Firstly, it is working towards the next step in the development
process for its Zambian-style copper cobalt projects by advancing technical and economic studies to build on the results
of the recently released Scoping Study, while simultaneously undertaking exploration to further define and extend
known Zambian-style copper-cobalt resources across multiple prospects.
Secondly, it is undertaking a substantial geophysics programme at the Emmie IOCG prospect to further understand the
structures and extent of the geological model defined over the past year of drilling.
Coda also has a Farm-In and Joint Venture Agreement with Wilgus Investments Pty Ltd to acquire up to 80% ownership
of the Cameron River Copper-Gold Project, located in the highly prospective Mount Isa Inlier in Queensland. The Project
comprises 35km2 of copper and gold exploration tenure spanning two Exploration Permits (EPMs 27042 and 27053).
Through Torrens Mining acquisition, Coda also owns exploration tenements in Victoria, New South Wales and Papua
New Guinea.
5 2021.12.20 - Standout 43Mt Maiden Cu-Co Resource at Emmie Bluff, Competent Person: Dr Michael Cunningham.
6 2020.10.26 - Confirmation Statements JORC, Competent Person: Tim Callaghan.
7 2023.03.23 – Elizabeth Creek Copper-Cobalt Project Scoping Study
8 2021.06.22 - Thick Zone of IOCG Mineralisation Intersected at Emmie Bluff Deeps, Competent Person: Mr Matthew Weber.
9 2022.08.18 – Assays from IOCG Drilling Confirm Target Areas for Follow Up, Competent Person: Mr Matthew Weber.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
Competent Persons’ Statements and Confirmatory Statement - Mineral Resource Estimates
ELIZABETH CREEK
Information regarding the MG14 and Windabout Mineral Resources is extracted from the report entitled “Confirmation
Statements JORC” created on 26th October 2020 and is available to view at https://www.codaminerals.com/wpcontent/uploads/2020/10/20201026_Coda_ASX-ANN_Confirmation-Statements-JORC.pdf
Information regarding the Company’s MG14 and Windabout Mineral Resource Estimates is based on, and fairly
represents, information and supporting documentation compiled by Tim Callaghan, who is self-employed. Mr Callaghan
is a Member of the Australasian Institute of Mining and Metallurgy (“AusIMM”), and has a minimum of five years’
experience which is relevant to the style of mineralisation and type of deposit under consideration and to the activity
which he is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the ‘Australasian Code for
Reporting of Exploration Results, Mineral Resources and Ore Reserves’ (”JORC Code”). Mr Callaghan has consented to
the inclusion in this announcement of the matters based on his information in the form and context in which it appears.
Information regarding the Emmie Bluff Mineral Resource is extracted from the report entitled “Standout 43Mt Maiden
Cu-Co Resource at Emmie Bluff” created on 20th December 2021 and is available to view at
https://www.codaminerals.com/wp-content/uploads/2021/12/20211220_Coda_ASX-ANN_Standout-43Mt-MaidenCu-Co-Resource-at-Emmie-Bluff_RELEASE.pdf
Information regarding the Company’s Emmie Bluff Mineral Resource Estimates is based on, and fairly represents work
done by Dr Michael Cunningham of Sonny Consulting Services Pty Ltd. Dr Cunningham is a Member of the Australasian
Institute of Mining and Metallurgy and has sufficient relevant experience to the style of mineralisation and type of
deposit under consideration and to the activities undertaken to qualify as a Competent Person as defined in the 2012
Edition of the Joint Ore Reserves Committee (JORC) Australasian Code for Reporting of Exploration Results, Mineral
Resources and Ore Reserves.
Listing Rule 5.23.2
The Company confirms that it is not aware of any new information or data that materially affects the information
included in the original market announcements cited in this announcement and, in the case of estimates of Mineral
Resources or Ore Reserves, that all material assumptions and technical parameters underpinning the estimates in the
relevant market announcement continue to apply and have not materially changed. The Company confirms that the
form and context in which the Competent Person’s findings are presented have not been materially modified from the
original market announcement.
Statement Regarding Metal Equivalent Calculations
Metal Equivalent grades are quoted for one or more of the Emmie Bluff, Windabout and MG14 Mineral Resources, or
for exploration results considered by the company to be related directly to one of these Mineral Resources, in this
announcement.
For the Emmie Bluff Mineral Resource:
The Emmie Bluff Mineral Resource is reported as 43Mt @ 1.3% Cu, 470 ppm Co, 11 g/t Ag and 0.15% Zn (1.84% Copper
Equivalent (CuEq)) reported at a cut-off grade of 1% CuEq. The calculation of this metal equivalent is based on the
following assumptions.
Metal
Copper
Cobalt
Zinc
Silver
Coefficient
0.8
0.85
0.9
0.85
Forecast Price
$7,000
$55,000
$2,100
$18.50
Price Unit
USD/Tonne
USD/Tonne
USD/Tonne
USD/Oz
Price assumptions used when calculating copper equivalent grades were based primarily on Consensus Economics
forecasts of metals, except for Cobalt, which was sourced via communication with subject matter experts. Metallurgical
assumptions used when calculating copper equivalent grades were based on a simple bulk float utilising rougher and
minimal cleaner/scavenger circuits. The produced a reasonably consistent mean recovery across most metals of
between approximately 83 and 94 percent. For simplicity, and to in part account for losses associated with less intensive
cleaner floats and losses to the hydromet plant, these figures were rounded down to the nearest 5%.
Application of these assumptions resulted in the following calculation of CuEq:
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
𝐶𝑢𝐸𝑞% = 𝐶𝑢% + 0.00068 × 𝐶𝑜 𝑝𝑝𝑚 + 0.337 × 𝑍𝑛 % + 90.3 ×
𝐴𝑔 𝑝𝑝𝑚
10000
ELIZABETH CREEK
For the Windabout and MG14 Mineral Resource:
The Windabout and MG14 Mineral Resource are reported at a cut-off grade of 0.5% CuEq as:
• Windabout: 17.67Mt @ 0.77% Cu, 492 ppm Co and 8 g/t Ag (1.41% CuEq)
• MG14: 1.83Mt @ 1.24% Cu, 334 ppm Co and 14 g/t Ag (1.84% CuEq)
The calculation of this metal equivalent is based on the following assumptions.
Metal
Copper
Cobalt
Mining
Recovery %
0.9
0.9
Dilution %
Recovery %
Payability %
Forecast Price
Price Unit
0.05
0.05
0.6
0.85
0.7
0.75
$6,600
$55,000
USD/Tonne
USD/Tonne
Price assumptions used when calculating copper equivalent grades were based on recent historical metal prices at the
time of calculation (2018). Metallurgical assumptions are based on extensive metallurgical testwork undertaken on the
two deposits to 2018 across various potential flowsheets involving both floatation and leaching. Ag analyses in the
estimation and metallurgical testwork were considered insufficient at the time to include in the metal equivalent
calculation.
Application of these assumptions resulted in the following calculation of CuEq:
𝐶𝑢𝐸𝑞% = 𝐶𝑢% + 0.0012 × 𝐶𝑜 𝑝𝑝𝑚
It is the opinion of the company that both sets of prices used in the calculations are reasonable to conservative longterm forecasts for real dollar metal prices during the years most relevant to the deposits (approx. 2026-2030).
It is the opinion of the company that all of the elements included in the metal equivalent calculations have a reasonable
potential to be recovered and sold.
For full details of the Emmie Bluff Metal Equivalent calculation, please see “Standout 43Mt Maiden Cu-Co Resource at
Emmie Bluff”, released to the ASX on 20th December 2021 and available at https://www.codaminerals.com/wpcontent/uploads/2021/12/20211220_Coda_ASX-ANN_Standout-43Mt-Maiden-Cu-Co-Resource-at-EmmieBluff_RELEASE.pdf.
For full details of the MG14/Windabout Metal Equivalent Calculation, please see “Confirmation of Exploration Target
& Mineral Resource and Ore Reserve Statement”, released to the ASX on 23 rd October 2020 and available at
https://www.codaminerals.com/wp-content/uploads/2020/10/20201026_Coda_ASX-ANN_Confirmation-StatementsJORC.pdf.
Forward Looking Statements
This announcement contains ‘forward-looking information’ that is based on the Company’s expectations, estimates
and projections as of the date on which the statements were made. This forward-looking information includes, among
other things, statements with respect to the Company’s business strategy, plans, development, objectives,
performance, outlook, growth, cash flow, projections, targets and expectations, mineral reserves and resources, results
of exploration and related expenses. Generally, this forward-looking information can be identified by the use of
forward-looking terminology such as ‘outlook’, ‘anticipate’, ‘project’, ‘target’, ‘potential’, ‘likely’, ‘believe’, ‘estimate’,
‘expect’, ‘intend’, ‘may’, ‘would’, ‘could’, ‘should’, ‘scheduled’, ‘will’, ‘plan’, ‘forecast’, ‘evolve’ and similar expressions.
Persons reading this announcement are cautioned that such statements are only predictions, and that the Company’s
actual future results or performance may be materially different. Forward-looking information is subject to known and
unknown risks, uncertainties and other factors that may cause the Company’s actual results, level of activity,
performance or achievements to be materially different from those expressed or implied by such forward-looking
information.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
Appendix 1: Detailed Technical Information and JORC Table 1
ELIZABETH CREEK
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Sampling
• Nature and quality of sampling (e.g. cut channels,
techniques
random chips, or specific specialised industry standard
measurement tools appropriate to the minerals under
investigation, such as down hole gamma sondes, or
handheld XRF instruments, etc). These examples
should not be taken as limiting the broad meaning of
sampling.
• Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
• Aspects of the determination of mineralisation that
are Material to the Public Report.
• In cases where ‘industry standard’ work has been
done this would be relatively simple (e.g. ‘reverse
circulation drilling was used to obtain 1 m samples
from which 3 kg was pulverised to produce a 30 g
charge for fire assay’). In other cases more explanation
may be required, such as where there is coarse gold
that has inherent sampling problems. Unusual
commodities or mineralisation types (e.g. submarine
nodules) may warrant disclosure of detailed
information.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
Commentary
• A ground gravity survey was carried out by DaishSat Geodetic Surveyors in
March 2023. Scintrex CG-5 Autograv gravity meters were used for gravity data
acquisition. Leica GX1230 GNSS receivers were used for gravity station position
acquisition. Up to 4 crews using UTVs carried out the survey.
• The survey was on a 125m x 125m grid, grid areas were positioned to infill
existing data, and a total of 3,635 gravity stations were surveyed.
• Repeat stations were strategically placed throughout the survey to monitor
and control positional accuracy and for gravity meter performance.
• Coordinates for GNSS base stations are calculated using three day’s worth of
static GNSS data connected to Australian based IGS (International GNSS
service, formerly the International GPS Service) stations using Geoscience
Australia’s online GNSS processing system, AUSPOS. Resulting base positions
usually showed final accuracy standard deviations (SD) of better than 5mm
obtained for x, y ,and z and can be considered first order.
• Raw GNSS data was processed using Waypoint’s (Novatel) GrafNav GNSS postprocessing software to produce survey positions accurate to within a couple of
centimetres.
• For each gravity observation the CG-5 gravity meter was carefully placed on its
tripod and levelled, restricting the vertical and horizontal levels to 5 arc
seconds. Once the meter was level, two gravity observations of 20-second
stacking time were read and recorded. The instrument was monitored for any
seismic or instrumental noise and the X/Y tilts, temperature and tolerance
between readings was monitored during the reading by the Surveyor. The
tolerance between readings wa
Share your feedback
Discover