Drilling Update
Released
Released
Announcement PDF
ASX RELEASE
18 December 2020
th
ASX Code: COD
Drilling Update
Highlights
• Drilling at the Emmie Bluff prospect within the Elizabeth Creek Copper Project commenced on
the 22nd of October, with 10 RC pre-collars and 7 diamond tails completed to date.
• Four holes encountered copper mineralisation confirmed by portable XRF. Samples are at the
lab with results expected late January 2021.
• Additional 9-hole diamond programme approved, additional $1.5M committed towards
resource definition and expansion.
• Ground gravity geophysics work to refine IOCG targets to commence early next year.
Coda Minerals Limited (ASX:COD, “Coda” or “The Company”) is pleased to announce that the Company
has now completed 7 of 8 planned drill holes from the Emmie Bluff resource definition and expansion
programme within the greater Elizabeth Creek Copper Project that commenced on 22nd October 2020.
Of the 7 completed holes, 4 have encountered copper mineralisation confirmed by portable XRF. The
final hole of the programme is expected to be completed early in January 2021 with down-hole EM
surveys also planned for the first two weeks of January.
The Company is working to assay mineralised core samples, although results are not expected before
the end of January 2020 due to high workloads and COVID-19 related challenges at the assay
laboratories in South Australia and the laboratory shutting down over the Christmas period. The
Company is working to finalise assay results and looks forward to sharing results as soon as they are
available.
A follow-on 9-hole diamond programme has been approved and is expected to commence
immediately following the completion of the initial 8-hole programme in early January 2021. Drilling
will initially target structures identified during drilling (see map, below).
Coda’s CEO, Chris Stevens commented, “We are very encouraged by the results to date from our initial
Emmie Bluff drill programme which is progressing on time and on budget. Emmie Bluff is a wellestablished target with a total of 18 mineralised holes completed to date over an approximately 3 km2
area. The current programme, drilling at the margins of the exploration target has identified and
assisted in the mapping of the major structures which appear to be relevant to both the geometry of
the basin containing the host Tapley Hill Fm shale and the later mineralising event.
“We are now confident to progress beyond this initial programme with an additional 9 holes planned
to commence as early as possible in the New Year. We have also committed to undertake a major
ground gravity geophysics programme to further refine IOCG targets. This programme is expected to
commence early in the new year and will assist with drill targeting for our flagship IOCG targets Elaine
and Emmie Bluff Deeps.”
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
*
*The potential quantity and grade of the Exploration Target is conceptual in nature and there has been insufficient exploration to estimate a Mineral Resource. It is
uncertain if further exploration will result in the estimation of a Mineral Resource.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
DD20EB0002
Above and Below: DD20EB0002 encountered haematitic fault breccia within the Pandurra Fm. Copper
sulphides were logged in vugs, with elevated copper grades confirmed by portable XRF, confirming the
fault as having carried copper and iron bearing fluids.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
Above and Below: Copper sulphides are irregularly distributed through the breccia, and are
most prominent in vugs, on fracture surfaces and associated with quartz veining.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
DD20EB0004
Above: Mineralised upper contact of the Tapley Hill Formation and the basal Whyalla conglomerate. This
conglomerate was also encountered in hole DD20EB0002. Below: Intercalated reducing black mudstone and
sandstone at the Whyalla/Tapley transition zone provides mineralisation traps, note evidence of silicification
and presence of sulphides.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
Above: Mineralised lower contact of the Tapley Hill Formation with the underlying Pandurra Formation.
Below: Silicification associated with soft sediment deformation and sulphides.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
DD20EB0005
Above: Strongly brecciated intercalated Tapley and Whyalla boundary. Possible evidence for fault proximity
DD20EB0007
Above: Sandier mineralised Tapley Hill Fm material from eastern flank of basin. Likely represents a facies change,
depositional environment may have been shallower, higher energy. Proximity to major fault encountered in hole
DD20EB0002 a likely pathway for copper bearing sulphides.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
Table 1: Material Collar locations
Hole Name
DD20EB0001
DD20EB0002
DD20EB0003
DD20EB0004
DD20EB0005
DD20EB0006
DD20EB0007
RC20EB0008
RC20EB0002
RC20EB0003
Easting
MGA94 Z53
708140
708025
707260
705457
704130
705155
706580
706330
708770
707633
Northing
MGA94 Z53
6553048
6554312
6554861
6555876
6557380
6555875
6556585
6556150
6553827
6553952
RL
Dip
Azi
EOH
199
199
183
174
157
182
176
169
197
184
-85
-80
-90
-79
-80
-80
-80
-88
-60
-60
273
282
0
84
270
90
270
270
93
275
490.1
512.8
456.7
456.8
400
413.9
479.4
218.9
239.6
209.6
—
This announcement has been authorised for release by the Board of Coda Minerals Ltd
For more information, please contact info@codaminerals.com
Further Information:
Chris Stevens
Chief Executive Officer
info@codaminerals.com
Peter Kermode
Cannings Purple
+61 411 209 459
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
Confirmatory Statement
The information is extracted from the report entitled “Confirmation Statements JORC” created on 26th October 2020 and
is available to view on https://www.codaminerals.com/wp-content/uploads/2020/10/20201026_Coda_ASXANN_Confirmation-Statements-JORC.pdf
The company confirms that it is not aware of any new information or data that materially affects the information included
in the original market announcement and, in the case of estimates of Mineral Resources or Ore Reserves, that all material
assumptions and technical parameters underpinning the estimates in the relevant market announcement continue to
apply and have not materially changed. The company confirms that the form and context in which the Competent Person’s
findings are presented have not been materially modified from the original market announcement.
Forward Looking Statements
This announcement contains ‘forward-looking information’ that is based on the Company’s expectations, estimates and
projections as of the date on which the statements were made. This forward-looking information includes, among other
things, statements with respect to the Company’s business strategy, plans, development, objectives, performance,
outlook, growth, cash flow, projections, targets and expectations, mineral reserves and resources, results of exploration
and related expenses. Generally, this forward-looking information can be identified by the use of forward-looking
terminology such as ‘outlook’, ‘anticipate’, ‘project’, ‘target’, ‘potential’, ‘likely’, ‘believe’, ‘estimate’, ‘expect’, ‘intend’,
‘may’, ‘would’, ‘could’, ‘should’, ‘scheduled’, ‘will’, ‘plan’, ‘forecast’, ‘evolve’ and similar expressions. Persons reading this
announcement are cautioned that such statements are only predictions, and that the Company’s actual future results or
performance may be materially different. Forward-looking information is subject to known and unknown risks,
uncertainties and other factors that may cause the Company’s actual results, level of activity, performance or
achievements to be materially different from those expressed or implied by such forward-looking information.
Competent Person’s Statement
The information in this report which relates to exploration results is based on information compiled by Mr. Matthew
Weber, who is an employee of the company. Mr Weber is a Member of the Australasian Institute of Mining and Metallurgy
and has sufficient relevant experience to the style of mineralisation and type of deposit under consideration and to the
activities undertaken to qualify as a Competent Person as defined in the 2012 Edition of the Joint Ore Reserves Committee
(JORC) Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr Weber consents
to the inclusion in this report of the matters based on the information compiled by him, in the form and context in which
it appears.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Sampling
techniques
Drilling
techniques
• Nature and quality of sampling (eg cut channels,
random chips, or specific specialised industry
standard measurement tools appropriate to the
minerals under investigation, such as down hole
gamma sondes, or handheld XRF instruments,
etc). These examples should not be taken as
limiting the broad meaning of sampling.
• Include reference to measures taken to ensure
sample representivity and the appropriate
calibration of any measurement tools or systems
used.
• Aspects of the determination of mineralisation that
are Material to the Public Report.
• In cases where ‘industry standard’ work has been
done this would be relatively simple (eg ‘reverse
circulation drilling was used to obtain 1 m samples
from which 3 kg was pulverised to produce a 30 g
charge for fire assay’). In other cases more
explanation may be required, such as where there
is coarse gold that has inherent sampling
problems. Unusual commodities or mineralisation
types (eg submarine nodules) may warrant
disclosure of detailed information.
• Drill type (eg core, reverse circulation, open-hole
hammer, rotary air blast, auger, Bangka, sonic,
etc) and details (eg core diameter, triple or
standard tube, depth of diamond tails, facesampling bit or other type, whether core is
oriented and if so, by what method, etc).
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
Commentary
• No assay results included in this release.
• Presence of mineralisation was determined by detailed logging by field
geologists and validated by means of handheld XRF.
• Handheld XRF readings were taken using an Olympus Vanta-M at 0.5m
intervals outside of suspected ore zones and 0.1m intervals within
suspected ore zones. XRF readings were checked against standards every
10 readings and duplicated every 20.
• XRF spot readings were taken to assist in the identification of certain
mineral species, but these have not been included in assessments of
mineralisation potential.
• Coda does not believe that the handheld XRF results are reliable or
accurate enough to be disclosed to the market under JORC 2012 guidelines
and has chosen to wait for assay by more reliable methods before disclosing
full results.
• All drill holes were drilled with RC precollars to approximately 150 – 250m,
followed by HQ standard tube diamond tails to a maximum depth of between
400 and 512.8m.
• Core was oriented by Ezymark core orientation tool.
Criteria
JORC Code explanation
Commentary
Drill sample
recovery
• Method of recording and assessing core and chip
sample recoveries and results assessed.
• Measures taken to maximise sample recovery and
ensure representative nature of the samples.
• Whether a relationship exists between sample
recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of
fine/coarse material.
• Whether core and chip samples have been
geologically and geotechnically logged to a level
of detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical
studies.
• Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc)
photography.
• The total length and percentage of the relevant
intersections logged.
• If core, whether cut or sawn and whether quarter,
half or all core taken.
• If non-core, whether riffled, tube sampled, rotary
split, etc and whether sampled wet or dry.
• For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
• Quality control procedures adopted for all subsampling stages to maximise representivity of
samples.
• Measures taken to ensure that the sampling is
representative of the in situ material collected,
including for instance results for field
duplicate/second-half sampling.
• Whether sample sizes are appropriate to the grain
size of the material being sampled.
• RC precollars are not believed to be relevant to the mineralising system at
Emmie Bluff and were not assessed for recovery.
• Recovery of diamond tails was excellent based on minimal core loss.
• No relationship is believed to exist between sample recovery and grade.
Logging
Sub-sampling
techniques
and sample
preparation
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
• Basic stratigraphic logging has been carried out by appropriately trained and
experienced field geologists on RC precollars.
• Detailed qualitative geological logging has been carried out by appropriately
trained and experienced field geologists on all diamond core. Quantitative
logging by means of pXRF has been undertaken as per previous detailed
methodology.
• No assay results reported in this release.
Criteria
JORC Code explanation
Commentary
Quality of
assay data
and
laboratory
tests
• The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or
total.
• For geophysical tools, spectrometers, handheld
XRF instruments, etc, the parameters used in
determining the analysis including instrument
make and model, reading times, calibrations
factors applied and their derivation, etc.
• Nature of quality control procedures adopted (eg
standards, blanks, duplicates, external laboratory
checks) and whether acceptable levels of
accuracy (ie lack of bias) and precision have been
established.
• The verification of significant intersections by
either independent or alternative company
personnel.
• The use of twinned holes.
• Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
• Discuss any adjustment to assay data.
• Accuracy and quality of surveys used to locate drill
holes (collar and down-hole surveys), trenches,
mine workings and other locations used in Mineral
Resource estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
• Data spacing for reporting of Exploration Results.
• Whether the data spacing and distribution is
sufficient to establish the degree of geological and
grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation
procedure(s) and classifications applied.
• Whether sample compositing has been applied.
• No assay results reported in this release.
Verification of
sampling and
assaying
Location of
data points
Data spacing
and
distribution
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
• No assay results reported in this release.
• Drill collar locations (including RL) have been located using handheld GPS,
MGA 94 Zone 53.
• No assay results reported in this release.
Criteria
JORC Code explanation
Commentary
Orientation of
data in
relation to
geological
structure
• Whether the orientation of sampling achieves
unbiased sampling of possible structures and the
extent to which this is known, considering the
deposit type.
• If the relationship between the drilling orientation
and the orientation of key mineralised structures is
considered to have introduced a sampling bias,
this should be assessed and reported if material.
• The measures taken to ensure sample security.
• Inferred structures based on gross drilling results, historical mapping and
previously announced seismic data. Orientation of core was unable to
provide information on the appropriate scale to assist in this identification
• The results of any audits or reviews of sampling
techniques and data.
• No assay results reported in this release.
Sample
security
Audits or
reviews
• No assay results reported in this release.
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Commentary
Mineral
tenement and
land tenure
status
• Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint
ventures, partnerships, overriding royalties, native title interests,
historical sites, wilderness or national park and environmental
settings.
• The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
• All drilling took place on EL 6265.
• EL 6265 is owned in a 51%:49% relationship by Coda
Minerals Ltd and Torrens Mining Ltd.
• Coda Minerals is currently farming in to increase its
ownership to a maximum of 75%.
• The tenure is in good standing and is considered secure
at the time of this release. No other impediments are
known at this time.
Exploration
done by other
parties
• Acknowledgment and appraisal of exploration by other parties.
• Historical exploration of the Emmie Bluff prospect has
been undertaken by (among others) Mt Isa Mines,
Gunson Resources, Torrens Mining and Gindalbie
Metals (Coda’s predecessor company).
• With the exception of data from Gindalbie Metals, all
historical results used to guide Coda’s exploration has
been obtained from the Geological Survey of South
Australia via the South Australian Resources Information
Gateway (SARIG).
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
Criteria
JORC Code explanation
Commentary
Geology
• Deposit type, geological setting and style of mineralisation.
•
•
Drill hole
Information
• A summary of all information material to the understanding of the
exploration results including a tabulation of the following information
for all Material drill holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation above sea level in
metres) of the drill hole collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
• If the exclusion of this information is justified on the basis that the
information is not Material and this exclusion does not detract from
the understanding of the report, the Competent Person should clearly
explain why this is the case.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
The Elizabeth Creek project sits in the Stuart Shelf
within the broader Olympic Copper Province in South
Australia. Specifically, mineralisation is hosted in the
dolomitic shales and dolarenites of the Neoproterozoic
Tapley Hill Formation. This formation unconformably
overlies the Meso/Palaeoproterozoic Pandurra
Formation due to local uplifting associated with the
Pernatty Upwarp. This unconformity, as well as
structures associated with the Pernatty Upwarp,
represent the most likely fluid flow pathways associated
with the emplacement of metal bearing sulphides.
Emmie Bluff mineralisation closely resembles
mineralisation in the MG14 and Windabout resources
found approximately 40 kilometres to the south, also
within the broader Elizabeth Creek tenure. It is
considered to fall within the broad “Zambian-style”
family of sediment hosted copper deposits.
• See Table 1 in body of announcement.
Criteria
JORC Code explanation
Commentary
Data
aggregation
methods
• In reporting Exploration Results, weighting averaging techniques,
maximum and/or minimum grade truncations (eg cutting of high
grades) and cut-off grades are usually Material and should be stated.
• Where aggregate intercepts incorporate short lengths of high grade
results and longer lengths of low grade results, the procedure used
for such aggregation should be stated and some typical examples of
such aggregations should be shown in detail.
• The assumptions used for any reporting of metal equivalent values
should be clearly stated.
• These relationships are particularly important in the reporting of
Exploration Results.
• If the geometry of the mineralisation with respect to the drill hole
angle is known, its nature should be reported.
• If it is not known and only the down hole lengths are reported, there
should be a clear statement to this effect (eg ‘down hole length, true
width not known’).
• Appropriate maps and sections (with scales) and tabulations of
intercepts should be included for any significant discovery being
reported These should include, but not be limited to a plan view of
drill hole collar locations and appropriate sectional views.
• Where comprehensive reporting of all Exploration Results is not
practicable, representative reporting of both low and high grades
and/or widths should be practiced to avoid misleading reporting of
Exploration Results.
• No assay results reported in this release.
Relationship
between
mineralisation
widths and
intercept
lengths
Diagrams
Balanced
reporting
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
• No assay results reported in this release.
• See map included in release for location of drillholes.
• No assay results reported in this release.
• No assay results reported in this release.
Criteria
JORC Code explanation
Commentary
Other
substantive
exploration
data
• Other exploration data, if meaningful and material, should be reported
including (but not limited to): geological observations; geophysical
survey results; geochemical survey results; bulk samples – size and
method of treatment; metallurgical test results; bulk density,
groundwater, geotechnical and rock characteristics; potential
deleterious or contaminating substances.
• No other substantive exploration results are considered
relevant to this release.
• The information regarding the Exploration Target referred
to on page 2 is extracted from the report entitled
Confirmation of Exploration Target and Mineral Resource
and Ore Reserve Statement, created on 23 October
2020 and is available to view on
https://www.asx.com.au/asxpdf/20201026/pdf/44p31fmg
5k2579.pdf. The company confirms that it is not aware of
any new information or data that materially affects the
information included in the original market
announcement and that all material assumptions and
technical parameters underpinning the estimates in the
relevant market announcement continue to apply and
have not materially changed. The company confirms that
the form and context in which the Competent Person’s
findings are presented have not been materially modified
from the original market announcement.
Further work
• The nature and scale of planned further work (eg tests for lateral
extensions or depth extensions or large-scale step-out drilling).
• Diagrams clearly highlighting the areas of possible extensions,
including the main geological interpretations and future drilling areas,
provided this information is not commercially sensitive.
• The Coda board has approved an additional nine holes
which will initially focus on areas of structural
prospectivity (i.e. near inferred faults). Additional drilling
will continue the process of infilling the exploration target
and attempt to expand the known mineralised envelope
within.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
Share your feedback
Discover