ANT Programme Completed at Elizabeth Creek Copper Project
Released
Released
Announcement PDF
ASX RELEASE
15 February 2023
ASX Code: COD
ANT Programme Completed at Elizabeth Creek Copper Project
Preliminary models demonstrate technical suitability of ANT technology to assist in defining IOCG and
sediment-hosted deposits, with data processing underway.
Highlights
• Ambient Noise Tomography (ANT) surveys completed safely, on time and on budget at the Emmie Bluff, Emmie
IOCG and Elaine prospects at the Elizabeth Creek Copper Project in South Australia.
• Preliminary models show exceptional applicability to both IOCG and sedimentary copper-cobalt contexts.
• Detailed interpretation underway, with results expected later this quarter.
Coda Minerals Limited (ASX: COD, “Coda”, or “the Company”) is pleased to advise that Ambient Noise Tomography
(ANT) surveys have now been completed at its 100%-owned Elizabeth Creek Copper Project in South Australia, with
preliminary analysis of the data enhancing Coda’s understanding of the geology and providing strong support for the
use of ANT for exploration target generation.
The Elizabeth Creek Project consists of the flagship Emmie Bluff underground deposit and the satellite MG14 and
Windabout open pit copper-cobalt-silver deposits, which are currently the subject of an ongoing Scoping Study, as
well as multiple exploration targets for additional sediment-hosted copper and IOCG deposits.
Coda has recently completed ANT surveys at the Emmie Bluff, Emmie IOCG and Elaine prospects 1. Four surveys were
successfully completed, three covering the broader Emmie Bluff area (including Emmie IOCG), with the fourth
covering the Elaine IOCG prospect.
The technology was deployed to provide a detailed sub-surface velocity map to assist in identifying structures that
may host extensions of and/or thicker mineralised portions of the Emmie IOCG deposit. Specific objectives included
the delineation of a detailed basement map which can be used to update and improve gravity inversions, and the
identification of potential additional sediment-hosted copper-cobalt mineralisation in the vicinity of the Emmie Bluff
Indicated Mineral Resource (43Mt @ 1.84% CuEq). 2.
Discussing the survey and results to date, Coda’s CEO Chris Stevens said: “We are very pleased by the preliminary
results from the ANT programme, with detailed interpretation of the survey data now underway. The technology has
met our principal goal as an IOCG exploration tool, providing detailed mapping of the basement and supplying the
data we need to materially improve our gravity models. We expect to commence additional gravity work in the coming
weeks to further refine these models, with the aim of significantly enhancing our understanding of the geometry of
the Emmie IOCG system.
“Importantly, the survey data has also highlighted new areas of interest to the northwest and southeast of Emmie
IOCG, which will be key areas of focus as the interpretation continues and we work to define future drill targets.
1 For full details, please see “ANT Geophysics Commences at Emmie IOCG”, released to the market on 12 January 2023 and available at
https://www.codaminerals.com/download/ant-geophysics-commences-at-emmie-iocg/?wpdmdl=4678
2 The Emmie Bluff Mineral Resource consists of 43 million tonnes at 1.3% copper, 470ppm cobalt, 11g/t silver and 0.15% zinc for 1.84% CuEq,
containing approximately 560kt copper, 20kt cobalt, 15.5Moz silver and 66kt zinc (800kt CuEq). For full details, including JORC Table 1 and
Competent Person’s (Dr Michael Cunningham) Statement please see “Standout 43Mt Maiden Cu-Co Resource at Emmie Bluff”, released to the
market on 22 December 2021 and available at https://www.codaminerals.com/download/standout-43mt-maiden-cu-co-resource-at-emmiebluff/?wpdmdl=3583
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
“In terms of the sediment-hosted copper-cobalt mineralisation, we are also encouraged by clear ANT anomalism identified
coincident with the Emmie Bluff Mineral Resource, as well as in other locations at the same stratigraphic level. These new
targets have not been subjected to any previous drilling and are likely to be elevated to high priority targets for Coda.
“These new targets offer strong upside over and above the existing copper-cobalt Resources that form the basis of the
ongoing Scoping Study, which is due for delivery very shortly, and demonstrate the outstanding potential for new copper
discoveries at Elizabeth Creek.
“We believe the Elizabeth Creek tenure offers exceptional potential for strong Resource growth, with numerous compelling
targets and the Company maintaining an aggressive approach to ongoing exploration.”
Figure 1 Cross section through most recent interpreted ANT model, with unconstrained inverted gravity shells (nominal
density 3.5 g/cm3, 4.0 g/cm3, 4.5 g/cm3) at northing 6,557,100 mN, filtered by shear wave velocity >2,800 m/s.. Emmie
Bluff (Blue outline) returns a strong anomaly at the appropriate depth largely consistent with drilling to date. To the West,
an apparent palaeotopographic high is associated with gravity anomalism (the AD8 anomaly) and local velocity
anomalism. Note the untested basement palaeotopographic step change just west of the centre of the section.
Figure 2 Cross section through most recent interpreted ANT model, with unconstrained inverted gravity shells (nominal
density 3.5 g/cm3, 4.0 g/cm3, 4.5 g/cm3) at northing 6,555,600 mN, filtered by shear wave velocity >2,800 m/s. The
prominent gravity anomaly associated with a marked step change in palaeotopgraphy is Emmie IOCG. Emmie Bluff (blue
outline) again shows coincident velocity anomalism.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
Figure 3 Cross section through most recent interpreted ANT model, with unconstrained inverted gravity shells (nominal
density 3.5 g/cm3, 4.0 g/cm3, 4.5 g/cm3) at northing 6,553,700 mN, filtered by shear wave velocity >2,800 m/s. The
prominent gravity anomaly to the west does not in this interpreted model show significant association with
palaeotopography, but does in other models (see Figure 4) and remains an active target. Anomalism in the cover sequence
is patchy (see blue rectangle), and has been interpreted as potentially indicating the presence of a narrow bed of Tapley
Hill Formation shale. This is partially supported by historical drilling, which has encountered unmineralized Tapley Hill
Formation on the far eastern edge of the anomalous zone.
Figure 4 Cross section through interpreted ANT model based on Emmie Bluff Survey 1 only, with unconstrained inverted
gravity shells (nominal density 3.5 g/cm3, 4.0 g/cm3, 4.5 g/cm3) at northing 6,553,700 mN, filtered by shear wave velocity
>2,800 m/s. Note that the data extends further east compared with Figure 3, and the coincidence between the prominent
gravity anomaly to the west and a palaeotopgraphic high.
Note on images: The above images are produced from a combined dataset, including all the cross-correlations for the
initial broad survey (Emmie Bluff Survey 1) as well as the two infills (Emmie Bluff Surveys 2 and 3). This is considered the
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
best and most current model at the time of this announcement, however further analysis and refinement by Coda’s
partners will very likely result in adjustments being made. Material changes will be reported to the market.
Previous models have shown broadly consistent patterns, with occasional variations. For example, a model built without
infill surveys (i.e. based only on Emmie Bluff Survey 1), as seen in Figure 4, shows approximately similar basement
topography to the most recent model (as seen on the same northing in Figure 3), but extends further east and appears
to show a palaeotopgraphic association with the gravity anomaly in that area which is not present In the current model .
Figure 5 Map showing all geode deployment points.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
—
This announcement has been authorised for release by the Board of Coda Minerals Ltd
Further Information:
Chris Stevens
Chief Executive Officer
Coda Minerals Limited
info@codaminerals.com
Media:
Nicholas Read
Read Corporate
nicholas@readcorporate.com.au
Competent Persons’ Statements – Exploration Results
The information in this announcement that relates to the Geophysical component of the Exploration Results is based on
information and supporting documentation compiled by Mr Regis Neroni, who is a Member of the Australian Institute of
Geoscientists (AIG) and a Registered Professional Geoscientist (RPGeo) in the fields of Geophysics and Mineral
Exploration. Mr Neroni is a Consulting Geophysicist with NewGen Geo Pty Ltd and has sufficient experience relevant to
the style of mineralisation under consideration and to the activity which is being undertaken to qualify as a Competent
Person as defined in the 2012 Edition of the “Australasian Code for Reporting of Exploration Results, Mineral Resources
and Ore Reserves”. Mr Neroni consents to the inclusion in this announcement of the matters based on this information
in the form and context in which it appears.
About Coda Minerals
Coda Minerals Limited (ASX: COD) is focused on the discovery and development of minerals that are leveraged to the
global energy transformation through electrification and the adoption of renewable energy technologies.
Coda's flagship asset is the 100%-owned Elizabeth Creek Copper-Cobalt Project, located in the world-class Olympic
Copper Province in the Eastern Gawler Craton, South Australia’s most productive copper belt. Elizabeth Creek is centred
100km south of BHP’s Olympic Dam copper-gold-uranium mine, 15km from its new Oak Dam West Project and 50km
west of OZ Minerals’ Carrapateena copper-gold project.
Coda consolidated 100% ownership of the Elizabeth Creek Copper Project after completing the acquisition of its former
joint venture partner, Torrens Mining, in the first half of 2022.
In December 2021, Coda announced a maiden Indicated and Inferred Mineral Resource Estimate for the Emmie Bluff
copper-cobalt deposit at Elizabeth Creek comprising 43Mt @ 1.3% copper, 470ppm cobalt, 11g/t silver and 0.15% zinc
(1.84% CuEq) containing approximately 560kt copper, 20kt cobalt, 15.5Moz silver and 66kt zinc (800kt CuEq) 3.
Importantly, 92% of the contained metal is classified in the higher confidence ‘Indicated Resource’ category and is
available for use in mining studies.
Emmie Bluff is one of three known ‘Zambian-style’ copper-cobalt deposits at Elizabeth Creek, including JORC 2012
compliant Indicated Mineral Resources at the Windabout (18Mt @ 1.14% CuEq) and MG14 (1.8Mt @ 1.67% CuEq)
3
2021.12.20 - Standout 43Mt Maiden Cu-Co Resource at Emmie Bluff, Competent Person: Dr Michael Cunningham.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
deposits 4. Collectively, the three resources at Elizabeth Creek now host a total of 1.1 million tonnes of contained copper
equivalent3,4.
Coda has also discovered a significant IOCG system adjacent to and below the Emmie Bluff target, with initial deep
diamond drilling in June 2021 intersecting 200m of intense IOCG alteration at the Emmie IOCG target, including
approximately 50m of copper sulphide mineralisation 5. Since then, Coda has drilled 21 holes into Emmie IOCG, with all
but three returning significant widths of mineralisation, some over 3% copper and 0.5g/t gold 6.
Coda has a dual strategy for success at Elizabeth Creek. Firstly, it is working towards a Scoping Study to determine the
economic potential of the known sediment-hosted Mineral Resources on the tenure, while simultaneously undertaking
exploration to further define and extend known Zambian-style copper-cobalt resources across multiple prospects.
Secondly, it is undertaking a substantial geophysics programme at the Emmie IOCG prospect to further understand the
structures and extent of the geological model defined over the past year of drilling.
Coda also has a Farm-In and Joint Venture Agreement with Wilgus Investments Pty Ltd to acquire up to 80% ownership
of the Cameron River Copper-Gold Project, located in the highly prospective Mount Isa Inlier in Queensland. The Project
comprises 35km2 of copper and gold exploration tenure spanning two Exploration Permits (EPMs 27042 and 27053).
Through Torrens Mining acquisition, Coda also owns exploration tenements in Victoria, New South Wales and Papua New
Guinea.
2020.10.26 - Confirmation Statements JORC, Competent Person: Tim Callaghan.
2021.06.22 - Thick Zone of IOCG Mineralisation Intersected at Emmie Bluff Deeps, Competent Person: Mr Matthew
Weber.
6
2022.09.18 – Assays from IOCG Drilling Confirm Target Areas for Follow Up, Competent Person: Mr Matthew Weber.
4
5
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
Competent Persons’ Statements and Confirmatory Statement - Mineral Resource Estimates
Information regarding the MG14 and Windabout Mineral Resources is extracted from the report entitled “Confirmation
Statements JORC” created on 26th October 2020 and is available to view at https://www.codaminerals.com/wpcontent/uploads/2020/10/20201026_Coda_ASX-ANN_Confirmation-Statements-JORC.pdf.
Information regarding the Company’s MG14 and Windabout Mineral Resource Estimates is based on, and fairly
represents, information and supporting documentation compiled by Tim Callaghan, who is self-employed. Mr Callaghan
is a Member of the Australasian Institute of Mining and Metallurgy (“AusIMM”), and has a minimum of five years’
experience which is relevant to the style of mineralisation and type of deposit under consideration and to the activity
which he is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the ‘Australasian Code for
Reporting of Exploration Results, Mineral Resources and Ore Reserves’ (”JORC Code”). Mr Callaghan has consented to
the inclusion in this announcement of the matters based on his information in the form and context in which it appears.
Information regarding the Emmie Bluff Mineral Resource is extracted from the report entitled “Standout 43Mt Maiden
Cu-Co Resource at Emmie Bluff” created on 20th December 2021 and is available to view at
https://www.codaminerals.com/wp-content/uploads/2021/12/20211220_Coda_ASX-ANN_Standout-43Mt-Maiden-CuCo-Resource-at-Emmie-Bluff_RELEASE.pdf
Information regarding the Company’s Emmie Bluff Mineral Resource Estimates is based on, and fairly represents work
done by Dr Michael Cunningham of Sonny Consulting Services Pty Ltd. Dr Cunningham is a Member of the Australasian
Institute of Mining and Metallurgy and has sufficient relevant experience to the style of mineralisation and type of
deposit under consideration and to the activities undertaken to qualify as a Competent Person as defined in the 2012
Edition of the Joint Ore Reserves Committee (JORC) Australasian Code for Reporting of Exploration Results, Mineral
Resources and Ore Reserves.
The Company confirms that it is not aware of any new information or data that materially affects the information
included in the original market announcements and, in the case of estimates of Mineral Resources or Ore Reserves, that
all material assumptions and technical parameters underpinning the estimates in the relevant market announcement
continue to apply and have not materially changed. The Company confirms that the form and context in which the
Competent Person’s findings are presented have not been materially modified from the original market announcement.
Statement Regarding Metal Equivalent Calculations
Metal Equivalent grades are quoted for one or more of the Emmie Bluff, Windabout and MG14 Mineral Resources, or
for exploration results considered by the company to be related directly to one of these Mineral Resources, in this
announcement.
For the Emmie Bluff Mineral Resource:
The Emmie Bluff Mineral Resource is reported as 43Mt @ 1.3% Cu, 470 ppm Co, 11 g/t Ag and 0.15% Zn (1.84% Copper
Equivalent (CuEq)) reported at a cut-off grade of 1% CuEq. The calculation of this metal equivalent is based on the
following assumptions.
Metal
Copper
Cobalt
Zinc
Silver
Coefficient
0.8
0.85
0.9
0.85
Forecast Price
$7,000
$55,000
$2,100
$18.50
Price Unit
USD/Tonne
USD/Tonne
USD/Tonne
USD/Oz
Price assumptions used when calculating copper equivalent grades were based primarily on Consensus Economics
forecasts of metals, except for Cobalt, which was sourced via communication with subject matter experts. Metallurgical
assumptions used when calculating copper equivalent grades were based on a simple bulk float utilising rougher and
minimal cleaner/scavenger circuits. The produced a reasonably consistent mean recovery across most metals of
between approximately 83 and 94 percent. For simplicity, and to in part account for losses associated with less
intensive cleaner floats and losses to the hydromet plant, these figures were rounded down to the nearest 5%.
Application of these assumptions resulted in the following calculation of CuEq:
𝐶𝐶𝐶𝐶𝐶𝐶𝐶𝐶% = 𝐶𝐶𝐶𝐶% + 0.00068 × 𝐶𝐶𝐶𝐶 𝑝𝑝𝑝𝑝𝑝𝑝 + 0.337 × 𝑍𝑍𝑍𝑍 % + 90.3 ×
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
𝐴𝐴𝐴𝐴 𝑝𝑝𝑝𝑝𝑝𝑝
10000
For the Windabout and MG14 Mineral Resource:
The Windabout and MG14 Mineral Resource are reported at a cut-off grade of 0.5% CuEq as:
• Windabout: 17.67Mt @ 0.77% Cu, 492 ppm Co and 8 g/t Ag (1.41% CuEq)
• MG14: 1.83Mt @ 1.24% Cu, 334 ppm Co and 14 g/t Ag (1.84% CuEq)
The calculation of this metal equivalent is based on the following assumptions.
Metal
Copper
Cobalt
Mining
Recovery %
0.9
0.9
Dilution %
Recovery %
Payability %
Forecast Price
Price Unit
0.05
0.05
0.6
0.85
0.7
0.75
$6,600
$55,000
USD/Tonne
USD/Tonne
Price assumptions used when calculating copper equivalent grades were based on recent historical metal prices at the
time of calculation (2018). Metallurgical assumptions are based on extensive metallurgical testwork undertaken on the
two deposits to 2018 across various potential flowsheets involving both floatation and leaching. Ag analyses in the
estimation and metallurgical testwork were considered insufficient at the time to include in the metal equivalent
calculation.
Application of these assumptions resulted in the following calculation of CuEq:
𝐶𝐶𝐶𝐶𝐶𝐶𝐶𝐶% = 𝐶𝐶𝐶𝐶% + 0.0012 × 𝐶𝐶𝐶𝐶 𝑝𝑝𝑝𝑝𝑝𝑝
It is the opinion of the company that both sets of prices used in the calculations are reasonable to conservative longterm forecasts for real dollar metal prices during the years most relevant to the deposits (approx. 2026-2030).
It is the opinion of the company that all of the elements included in the metal equivalent calculations have a reasonable
potential to be recovered and sold.
For full details of the Emmie Bluff Metal Equivalent calculation, please see “Standout 43Mt Maiden Cu-Co Resource at
Emmie Bluff”, released to the ASX on 20th December 2021 and available at https://www.codaminerals.com/wpcontent/uploads/2021/12/20211220_Coda_ASX-ANN_Standout-43Mt-Maiden-Cu-Co-Resource-at-EmmieBluff_RELEASE.pdf. For full details of the MG14/Windabout Metal Equivalent Calculation, please see “Confirmation of
Exploration Target & Mineral Resource and Ore Reserve Statement”, released to the ASX on 23rd October 2020 and
available at https://www.codaminerals.com/wp-content/uploads/2020/10/20201026_Coda_ASX-ANN_ConfirmationStatements-JORC.pdf.
Forward Looking Statements
This announcement contains ‘forward-looking information’ that is based on the Company’s expectations, estimates and
projections as of the date on which the statements were made. This forward-looking information includes, among other
things, statements with respect to the Company’s business strategy, plans, development, objectives, performance,
outlook, growth, cash flow, projections, targets and expectations, mineral reserves and resources, results of exploration
and related expenses. Generally, this forward-looking information can be identified by the use of forward-looking
terminology such as ‘outlook’, ‘anticipate’, ‘project’, ‘target’, ‘potential’, ‘likely’, ‘believe’, ‘estimate’, ‘expect’, ‘intend’,
‘may’, ‘would’, ‘could’, ‘should’, ‘scheduled’, ‘will’, ‘plan’, ‘forecast’, ‘evolve’ and similar expressions. Persons reading
this announcement are cautioned that such statements are only predictions, and that the Company’s actual future
results or performance may be materially different. Forward-looking information is subject to known and unknown
risks, uncertainties and other factors that may cause the Company’s actual results, level of activity, performance or
achievements to be materially different from those expressed or implied by such forward-looking information.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
Appendix 1: JORC Table 1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
Sampling
techniques
Drilling techniques
Drill sample
recovery
JORC Code explanation
•
Nature and quality of sampling (e.g. cut channels, random
chips, or specific specialised industry standard measurement
tools appropriate to the minerals under investigation, such as
down hole gamma sondes, or handheld XRF instruments, etc).
These examples should not be taken as limiting the broad
meaning of sampling.
•
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
•
Aspects of the determination of mineralisation that are
Material to the Public Report.
•
In cases where ‘industry standard’ work has been done this
would be relatively simple (e.g. ‘reverse circulation drilling was
used to obtain 1 m samples from which 3 kg was pulverised to
produce a 30 g charge for fire assay’). In other cases more
explanation may be required, such as where there is coarse
gold that has inherent sampling problems. Unusual
commodities or mineralisation types (e.g. submarine nodules)
may warrant disclosure of detailed information.
•
Drill type (e.g. core, reverse circulation, open-hole hammer,
rotary air blast, auger, Bangka, sonic, etc) and details (e.g. core
diameter, triple or standard tube, depth of diamond tails, facesampling bit or other type, whether core is oriented and if so,
by what method, etc).
•
Method of recording and assessing core and chip sample
recoveries and results assessed.
•
Measures taken to maximise sample recovery and ensure
representative nature of the samples.
•
Whether a relationship exists between sample recovery and
grade and whether sample bias may have occurred due to
preferential loss/gain of fine/coarse material.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
Commentary
•
No new samples are reported as part of this release.
•
No new drilling is reported as part of this release.
•
No new drilling is reported as part of this release.
Criteria
Logging
Sub-sampling
techniques and
sample
preparation
Quality of assay
data and
laboratory tests
Verification of
sampling and
assaying
JORC Code explanation
•
Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support
appropriate Mineral Resource estimation, mining studies and
metallurgical studies.
•
Whether logging is qualitative or quantitative in nature. Core
(or costean, channel, etc) photography.
•
The total length and percentage of the relevant intersections
logged.
•
If core, whether cut or sawn and whether quarter, half or all
core taken.
•
If non-core, whether riffled, tube sampled, rotary split, etc and
whether sampled wet or dry.
•
For all sample types, the nature, quality and appropriateness
of the sample preparation technique.
•
Quality control procedures adopted for all sub-sampling stages
to maximise representivity of samples.
•
Measures taken to ensure that the sampling is representative
of the in situ material collected, including for instance results
for field duplicate/second-half sampling.
•
Whether sample sizes are appropriate to the grain size of the
material being sampled.
•
The nature, quality and appropriateness of the assaying and
laboratory procedures used and whether the technique is
considered partial or total.
•
For geophysical tools, spectrometers, handheld XRF
instruments, etc, the parameters used in determining the
analysis including instrument make and model, reading times,
calibrations factors applied and their derivation, etc.
•
Nature of quality control procedures adopted (e.g. standards,
blanks, duplicates, external laboratory checks) and whether
acceptable levels of accuracy (i.e. lack of bias) and precision
have been established.
•
The verification of significant intersections by either
independent or alternative company personnel.
•
The use of twinned holes.
•
Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
•
Discuss any adjustment to assay data.
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
Commentary
•
No new drilling is reported as part of this release.
•
No new drilling is reported as part of this release.
•
No new assays are reported as part of this release
•
No new samples or assays are reported as part of this release.
Criteria
Location of data
points
JORC Code explanation
•
Accuracy and quality of surveys used to locate drill holes
(collar and down-hole surveys), trenches, mine workings and
other locations used in Mineral Resource estimation.
•
Specification of the grid system used.
•
Quality and adequacy of topographic control.
Data spacing and
distribution
•
•
•
Orientation of data
in relation to
geological
structure
•
Sample security
•
Audits or reviews
•
6 Altona Street
West Perth
Western Australia, 6005
•
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is sufficient to
establish the degree of geological and grade continuity
appropriate for the Mineral Resource and Ore Reserve
estimation procedure(s) and classifications applied.
Whether sample compositing has been applied.
Commentary
•
All maps and spatial references are to MGA 94 Zone 53.
•
Geodes deployment was undertaken using handheld GPS units, with an accuracy typically of +/3m. Internal GPS within the geodes ultimately recorded the unit’s location with greater (though
not specified) accuracy.
•
Topographic control is provided by GPS instruments on the Geodes and is considered of
acceptable quality for the level of study currently being undertaken by Coda given the relatively
flat and unchallenging terrain typical of the Elizabeth Creek project.
•
•
No new drilling is reported as part of this release, and no part is relevant to the estimation of a
Mineral Resource or Ore Reserve.
Data was collected in 4 surveys with spacing as follows:
•
Survey
Station Spacing
Line Spacing
Line Orientation
Emmie Bluff Survey 1
1,100m
1,000m
E/W
Emmie Bluff Survey 2
500m
550m
NE/SW
Emmie Bluff Survey 3
500m
400m
NE/SW
Elaine Survey 1
1,000m
Variable
NE/SW
All orientations and spacings are approximate, and typically varied across the given survey.
Whether the orientation of sampling achieves unbiased
sampling of possible structures and the extent to which this is
known, considering the deposit type.
If the relationship between the drilling orientation and the
orientation of key mineralised structures is considered to have
introduced a sampling bias, this should be assessed and
reported if material.
The measures taken to ensure sample security.
•
•
No new drilling or sampling is reported as part of this release.
Orientation of survey lines during geode deployment was optimised for coverage (Emmie Bluff
Survey 1) then for alignment with the largest local noise source as a means to reduce local
interference. Orientation is not believed to have introduced material bias which cannot be
corrected by processing, which remains ongoing.
•
No new drilling or sampling is reported as part of this release.
The results of any audits or reviews of sampling techniques
and data.
•
Data as presented in the figures in the body of this announcement are preliminary and are
undergoing further refinement and audit
E: info@codaminerals.com
ABN 49 625 763 957
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
Mineral tenement
and land tenure
status
Exploration done
by other parties
JORC Code explanation
•
Type, reference name/number, location and ownership
including agreements or material issues with third parties such
as joint ventures, partnerships, overriding royalties, native title
interests, historical sites, wilderness or national park and
environmental settings.
•
The security of the tenure held at the time of reporting along
with any known impediments to obtaining a licence to operate
in the area.
•
Acknowledgment and appraisal of exploration by other parties.
Commentary
•
All exploration described above took place on EL 6518 and EL 6265.
•
ELs 5636 and 6265 are owned in a 70:30 unincorporated Joint Venture by Coda Minerals Ltd and
Terrace Mining Pty Ltd (a wholly owned subsidiary of Coda Minerals).
•
The tenure is in good standing and is considered secure at the time of this release. No other
impediments are known at this time.
•
•
6 Altona Street
West Perth
Western Australia, 6005
E: info@codaminerals.com
ABN 49 625 763 957
Historical exploration of the Elizabeth Creek project has been undertaken by (among others) Mt
Isa Mines, Gunson Resources, Torrens Mining and Gindalbie Metals (Coda’s predecessor
company). Historical Exploration at the MG14 and Windabout prospects have been underta
Share your feedback
Discover